Properties:

• GSM MODEM dual-band: 900 MHz to 1800 MHz

The device makes the Internet connection itself by own m2m line. A GSM network is sufficient.

• Remote Software Update: Software improvements such as defining a new sensor and adding a sensor standard are made by using GSM connection in the device menu. The device does not need to be serviced or manually loaded with data cables. All done free of charge.

• 3.5 TFT Color and touch screen: 320 x 480 pixels / resistive

The menus on the device are easy to reach with the touch screen. Turkish, English and German support is available.

• Internal Memory: The internal memory card is used for both the software of the device and for storing sensor recordings.

• Capacitive keyboard: With the keyboard you can do all the operations you can do on the screen. It is a long-lasting technology.

• 3 relay outputs: max. 48 VAC / 1 With these relays, siren, carbon dioxide management is possible. Deactivates when standard is supplied or stopped externally.

• Built-in buzzer: In case of alarm and during use, it is positioned to sound the menus while browsing.

• LED Indicators: The status of the device, GSM connection, Sensor data flows, Relays shutdown are reported as light.

- 1 RGB-LED (General status, sensor data exchange), 1 green LED (GSM), 3 green LED (Relay)

• Working heat bandwidth: 0C ... + 45C

• Transceiver: LoRa 868 max 400 m or 2.4 GHz max 100 m shooting area

• 5 VDC / 2 A Supply

• 3.6 V / 2600 mAh built-in Li-Ion battery

• Max. 8 wireless sensor configurations: 8 main (heat-humidity), heat-humidity-co2 or three-phase power failure sensors can be connected to each main unit. max 24 sensor data